Pračka - Jak vyměnit elektrický ventil (1)

Vztahuje se na

Řešení

Vždy se před jakoukoliv opravou nebo údržbou řiďte bezpečnostními informacemi uvedenými v uživatelské příručce vašeho výrobku. https://www.electrolux.com/support/user-manuals/

VAROVÁNÍ! NEBEZPEČÍ ÚRAZU ELEKTRICKÝM PROUDEM

Před jakoukoliv opravou nebo údržbou vypněte přístroj a odpojte síťovou zástrčku ze zásuvky.

WARNING! RISK OF INJURY

Always take care when moving appliances. For heavy appliances it's safest for two persons to move it. Always use safety gloves and safety footwear. Wear safety gloves at all times to protect from cuts from sharp edges.

VAROVÁNÍ! RIZIKO PORANĚNÍ OČÍ

Wear safety glasses if you perform maintenance or repair work involving springs.

WARNING! RISK OF PINCHING

Wear safety glovesif you perform maintenance or repair work involving belts.

WARNING! CHOKING HAZARD

Small parts not for children under 3 years. Keep all small parts and packaging out of reach of children.

Only adults should use or install the product.

Always empty the appliance of all the water, e.g. tumble dryer water container. Any maintenance should be carried out with the appliance standing upright. Residual water could damage electronics if the appliance is placed on any of its sides.

Make sure to use the product only for its designated purpose and verify that it is a compatible part for the intended product.

Do not use or install the product if damaged.

Please note that self-repair or nonprofessional repair can have safety consequences if not done properly and might void the warranty. Possessing the necessary know-how is essential.

HOW TO REPLACE ELECTRIC VALVE

1. Remove the two screws at the back of the washing machine. Pull the top cover to the back direction and remove the top cover.

2. Remove the wires, the water inlet pipes and the clamps

3. Remove the screws of the water inlet valve by a cross screwdriver to take off the water inlet valve.

4. Please connect the wires correctly while replace the water inlet valve.